Parking Barrier Ticket dispenser

Ticket Dispenser 1. RS232/TTL interfac 2. Prevent 2 cards dispensing 3. Card thickness adjustable 4. Card holder adjustable

Ticket Dispenser:

 

Specifications:

1. Power supply: DC24V (current≤2A)

2. Working temperature: -20°C to +85°C

3. Relative humidity: ≤90%

4. Usage: it is installed in the cabinet

Dimension of the card:

Width: 54mm

Length: 85mm

Thickness: 0.3 – 2.5mm (this can be adjusted. The original thickness is 0.8mm)

5. Material of the cards: any paper card and PVC card

6. Net weight of the card dispenser: 2kgs

7. Time for dispensing a card: 1s

8. Capacity of the dispenser: if the card is 0.8mm thick, then it can contain 150 pieces of cards.

 

Features:

1. It is suitable to be used in the parking lot which there is no management person.

2. Convenient to install and maintain the card dispenser because of its smooth base board design.

3. It can dispense card automatically.

4. Signal is there for insufficient balance or blank card.

5. The card will go back to the inside of the dispenser if the card is not taken 10s after it comes out.

6. Mistakes can be automatically checked and alarmed.

7. It is connected with the loop detector so when vehicle comes, the card will be dispensed automatically. One vehicle one card.

8. Invalid card will be got back.

9. It can accept the card which is distortion.

10. The capacity of the card box can be adjusted from 0.3mm to 2.5mm.

11. The card box allow 40 cards, if the card is insufficient, there will be alarm to inform you.

12. Mechanism and electronics are applied to the bad environments where has high or low temperature or a lot of dust.

Parking Barrier Ticket dispenser